This file contains the data of the moored ADCP. The data format is the following:

profil header:

## 00000013 13:06:1996  15:30:00:18  150.00 35  14.76 1509 346.95   0.11   0.37    0
     |		|	     |		|    |     |    |      |     |      |      |
     |		|	     |		|    |     |    |      |     |      |      |
     |		|	  hour(UT)	| salinity |    |      |     |      |      |
profile number	|		    programmed     |  sound    |   pitch    |    status
	       date 		   immersion(m)    |  speed    |    (deg)   |
	       				      temperature      |            |
                                                            head(deg)     roll
                                                            		  (deg)

REMARKS :
	* programmed immersion: immersion recorded during device programmation. The depth
          in the profile data are computed as follows:
			Z = Z0 - Distance2Bin1Middle - i*BinLength with :
	  Z0 : estimated depth from the surface acoustic echo.
	  Distance2bin1Middle : distance from the transducers  to the middle of the first cell.
	  BinLength : cell size.

	* Temperature : internal temperature sensor of the acoustic bases.
	* salinity :  constant salinity (no sensor available)
	* sound speed:  reference sound speed used for current measurement. It is computed
	  from the programmed depth, the temperature and the salinity.
	* head: head of the ADCP.	
	* pitch : pitch of the ADCP
	* roll : roll of the  ADCP

Profile : 

101.99     -0.52  -13.01    1.90   11.20    0104 0100 0098 0105    0092 0092 0093 0090    0085 0010 0000 0005    
97.99      -0.35    1.47    0.30    1.60    0115 0108 0124 0117    0091 0110 0095 0099    0075 0010 0000 0015    
93.99       9.92   -9.87    1.30   12.00    0121 0117 0120 0137    0088 0114 0088 0110    0095 0000 0000 0005    
89.99       7.91   -5.75    1.30   11.20    0105 0118 0110 0118    0100 0118 0102 0102    0090 0000 0000 0010    
85.99       7.09   -6.63    1.80   13.30    0133 0126 0137 0120    0099 0114 0098 0100    0095 0000 0000 0005     
  |	     |       |       |       |       |    |     |    |      |    |     |    |      |    |     |    |
  |	     |       |       |       |       |____|_____|____|      |____|_____|____|      |    |     |    |
  |	     |     v(cm/s)   |     error            |                      |               |  pg012   |   pg3
depth     u(cm/s)         w(cm/s)                   |                      |              pg4        pge
					     beams correlation        Echo intensity 
					        (0..255)             from the 4 beams


NOTES :
	* u : positive towards East
	* v : positive towards North
	* w : positive towards surface
	* error : Estimation of the absolute current error (cm/s)
	* Echo intensity:  multiply by 0.45 to have dBs.

	* pg4 : Rate of speed measurement with 4 beams (in %)
	* pg012 : Rate of speed measurement rejection because at least 2 beams were not usable (in %).
	* pge : Rate of speed measurement rejection because the error was greater than 5 m/s (in %).
	* pg3 : Rate of speed measurement with 3 beams (in %)
------------------------------------end here---------------------------------------------